Sliding Matched Terminations
The 585 Series Sliding matched loads are designed for use in test and development sets where low VSWR is being measured. By changing the position of the sliding load, the test engineer can determine a minimum/ maximum VSWR due to the phasing between the VSWR of the load and VSWR of the unit under test. This min/max VSWR is used to determine the true VSWR of the unit under test. The 585 Series loads are also used to measure coupler directivity and residual VSWR in slotted line or other reflection measuring devices.
Note: Our website contains just a few types of Terminaions we build. Consult with us for your specific needs.
| Model | Band | Frequency Low (GHz) | Frequency High (GHz) | Average Power (Watts) | VSWR | RF Ports | LINK |
|---|---|---|---|---|---|---|---|
| 585Ku/595 | Ku-Band | 12 | 18 | 1.0 | 1.05:1 | WR-61 Waveguide, UG-595/U | |
| 585K/595 | K-Band | 18 | 26.5 | 1.0 | 1.05:1 | WR-42 Waveguide, UG-595/U Flange | |
| 585A/599 | Ka-Band | 26.5 | 40 | 1.0 | 1.05:1 | WR-28 Waveguide, UG-599/U Flange | |
| 585B/383 | Q-Band | 33 | 50 | 5.0 | 1.05:1 | WR-22 Waveguide, UG-383/U Flange | |
| 585U/383 | U-Band | 40 | 60 | 0.7 | 1.06:1 | WR-19 Waveguide, UG-383/U Flange | |
| 585V/385 | V-Band | 50 | 75 | 0.3 | 1.06:1 | WR-15 Waveguide, UG-385/U Flange | |
| 585E/387 | E-Band | 60 | 90 | 0.3 | 1.06:1 | WR-12 Waveguide, UG-387/U Flange | |
| 585W/387 | W-Band | 75 | 110 | 0.2 | 1.08:1 | WR-10 Waveguide, UG-387/U Flange | |
| 585F/387 | F-Band | 90 | 140 | 0.1 | 1.08:1 | WR-8 Waveguide, UG-387/U Flange | |
| 585D/387 | D-Band | 110 | 170 | 0.1 | 1.08:1 | WR-6 Waveguide with UG-387/U-M Flange | |
| 585G/387 | G-Band | 140 | 220 | 0.1 | 1.10:1 | WR-5 Waveguide, UG-387/U Flange |
