90 – 140 GHz, Four Position Manual Waveguide Switch

530F/387, Insertion Loss 0.7 dB, VSWR 1.15:1, Isolation 50 dB

Description:

Mi-Wave’s 530 Series waveguide switches consists of a waveguide switch selection and a rotary motor encased in a machined housing. They are particularly useful in operational systems and test setups where they supply variety of switching combinations.

Each unit will operate over the full waveguide bandwidth with minimum insertion loss, minimum VSWR, and maximum isolation between coupled and uncoupled waveguide sections.

Features

• Positive Indexing

• Optimum Isolation

• Non-contacting Choke Coupling

• Versatile Switching Combination

Applications

• Instrumentation

• Transmission Switching

• Manual Test Setups

*All data presented is collected from a sample lot.
* Actual data may vary unit to unit, slightly.
*All testing was performed under +25 °C case temperature.
*Consult factory to confirm if material, plating, size, shape, orientation and any electrical parameter is critical for the application as website information is for reference only.
*Millimeter Wave Products, Inc. reserves the right to change the information presented on website without notice as we continue to enhance the performance and design of our products.

Manual Waveguide Switch

The 530 Series Manual Waveguide Switches are used for transmission switching applications in millimeter wave systems. These versatile devices provide a variety of switching combinations using three waveguide channels and three positions. In a typical radar application, a three-position switch can be used manually to switch one of two transmitters to a common antenna, while simultaneously connecting the other transmitter to a suitable termination. A manual switch will also provide a convenient means for alternately connecting a test antenna and standard horn to gain-measuring test equipment.

Other frequency bands and custom configurations available.

-WR-42 and lower will be E-Plane Types