460A-35/7/KF, Passband Insertion Loss 1.5 dB, I/O Impedance 50 Ohms

Key Performance Features

Mi-Wave’s 460 Series Bandpass Filters are precision-engineered to provide reliable frequency selectivity, low signal loss, and excellent interference suppression across RF, microwave, and millimeter-wave systems. Designed for laboratory, commercial, aerospace, and defense applications, these filters deliver repeatable performance across a broad range of operating environments.

Broadband Frequency Coverage

Available across frequency bands from approximately 8 GHz to 140 GHz, supporting microwave and millimeter-wave systems with standard waveguide interfaces.

Narrowband and Wideband Filter Options

Offered in configurations with typical bandwidths ranging from 1% to 10% of center frequency, allowing designers to balance selectivity, insertion loss, and system requirements.

Low Insertion Loss

Optimized filter designs minimize signal attenuation within the passband, helping preserve receiver sensitivity, improve signal-to-noise ratio, and maximize overall system performance.

Low VSWR and Excellent Impedance Matching

Maintains efficient RF power transfer with minimal reflections, reducing mismatch losses and supporting stable operation throughout the specified frequency range.

High Out-of-Band Rejection

Provides strong suppression of unwanted signals, harmonics, image frequencies, and adjacent-channel interference to improve spectral purity and receiver protection.

Sharp Frequency Selectivity

Engineered to provide precise passband control and rapid attenuation outside the desired frequency range, helping improve channel isolation and reduce unwanted signal leakage.

Standard Waveguide Compatibility

Available with industry-standard WR-series waveguide interfaces for straightforward integration into existing RF, microwave, and millimeter-wave systems.

Precision-Machined Construction

Manufactured using high-precision machining techniques to ensure dimensional accuracy, consistent electrical performance, and long-term reliability.

Thermal and Mechanical Stability

Robust metal housing construction helps maintain filter performance across changing environmental conditions, temperature variations, and demanding operating environments.

Repeatable RF Performance

Designed for consistent electrical characteristics from unit to unit, making the 460 Series suitable for production systems, laboratory measurements, calibration setups, and field-deployed platforms.

Custom Configurations Available

Mi-Wave can provide custom center frequencies, bandwidths, rejection levels, waveguide sizes, flange types, and packaging configurations to support specialized application requirements.

Applications for 460 Series Bandpass Filters

The MIWV 460 Series Bandpass Filters are designed for integration into a wide range of RF, microwave, and millimeter-wave systems where precise frequency selection, interference suppression, and signal integrity are essential. These filters are commonly used in both commercial and defense-grade platforms, supporting fixed, mobile, airborne, and space-constrained applications.

Satellite Communications (SatCom)

460 Series bandpass filters are widely used in satellite communication systems to isolate uplink and downlink frequency bands, suppress out-of-band interference, and protect sensitive receiver components.

Typical SatCom applications include:

• Ground-based satellite terminals and gateway stations

• Airborne and maritime SatCom platforms

• Ka-band and Q-band satellite uplinks and downlinks

• Payload frequency management and channel isolation

• Interference mitigation in crowded satellite frequency allocations

• Protection of LNAs, BUCs, and frequency converters

These filters help improve link stability, reduce noise, and maintain regulatory compliance in high-density satellite environments.

Radar Systems

In radar applications, 460 Series bandpass filters are used to improve target detection, reduce clutter, and protect receiver front ends from unwanted signals.

Common radar uses include:

• Fire-control and target-tracking radar

• Surveillance and perimeter monitoring radar

• Imaging and high-resolution radar systems

• Ground-based, airborne, and maritime radar platforms

• Harmonic suppression in high-power radar transmit chains

• Receiver protection from strong out-of-band signals

By tightly controlling the radar operating band, these filters enhance signal-to-noise ratio and overall system performance.

Electronic Warfare and Signal Intelligence (EW / SIGINT)

Electronic warfare and SIGINT systems require high selectivity and strong out-of-band rejection, making the 460 Series well suited for these mission-critical applications.

Use cases include:

• Threat signal isolation and monitoring

• Interference and jamming mitigation

• Spectrum surveillance and signal collection

• Front-end filtering for wideband receivers

• Channelized receivers and frequency-selective architectures

• Protection of sensitive EW receiver chains

The robust mechanical construction and repeatable RF performance make these filters suitable for deployed EW systems.

RF Upconversion and Downconversion Chains

460 Series Bandpass Filters are commonly integrated into frequency conversion architectures to remove unwanted mixer products and spurious signals.

Applications include:

• RF upconverters and downconverters

• Block upconverters (BUCs) and low-noise block downconverters (LNBs)

• Intermediate frequency (IF) and RF stage filtering

• Harmonic and image rejection after mixing stages

• Clean signal generation for transmit chains

These filters help maintain spectral purity and prevent interference between system stages.

Test and Measurement Systems

In laboratory and production environments, 460 Series bandpass filters are used to ensure accurate, repeatable measurements at high frequencies.

Typical test applications include:

• Millimeter-wave test benches and calibration setups

• Signal generators and spectrum analyzers

• Automated test equipment (ATE)

• Device characterization and validation

• Noise figure and linearity measurements

• Production testing of RF and mmWave components

Their stable performance makes them ideal for R&D and manufacturing environments.

High-Data-Rate Wireless and Point-to-Point Links

460 Series bandpass filters support high-frequency wireless communication systems where spectral efficiency and interference control are critical.

Applications include:

• Point-to-point microwave and millimeter-wave backhaul

• Fixed wireless access (FWA) systems

• High-capacity data links

• Short-range high-bandwidth communication systems

• Experimental and emerging wireless technologies

These filters help maintain link reliability in dense RF environments.

Scientific, Aerospace, and Research Applications

460 Series filters are also used in scientific instrumentation and advanced research platforms that operate at microwave and millimeter-wave frequencies.

Examples include:

• Radio astronomy and remote sensing systems

• Atmospheric and environmental monitoring instruments

• University and government research laboratories

• Spaceborne and airborne experimental payloads

• Advanced sensing and imaging platforms

System Protection and Interference Mitigation

Across all industries, 460 Series Bandpass Filters are used to:

• Protect sensitive RF receivers from overload

• Suppress out-of-band noise and interference

• Improve system dynamic range

• Maintain compliance with spectral regulations

• Enhance overall RF system reliability

Frequently Asked Questions (FAQ)

What is a bandpass filter?

A bandpass filter is an RF component that allows a specific range of frequencies to pass while attenuating signals above and below the desired frequency range. Bandpass filters are used to improve signal quality, reduce interference, and protect sensitive RF equipment.

What are bandpass filters used for?

Bandpass filters are commonly used in:

• Satellite communications (SatCom)
• Radar systems
• Telemetry networks
• Electronic warfare systems
• RF and microwave test equipment
• Wireless communication systems
• Research and development laboratories
• Millimeter-wave sensing and imaging systems

What frequency range do Mi-Wave 460 Series Bandpass Filters support?

The 460 Series is available across frequency bands from approximately 8 GHz to 140 GHz, covering many microwave and millimeter-wave applications.

Why are bandpass filters important in RF systems?

Bandpass filters help remove unwanted signals, harmonics, noise, and adjacent-channel interference. This improves receiver sensitivity, signal integrity, and overall system performance.

What is center frequency?

The center frequency is the midpoint of the filter’s passband and represents the primary operating frequency around which the filter is designed.

What is bandwidth?

Bandwidth is the range of frequencies that the filter allows to pass with minimal attenuation. It is typically defined by the upper and lower cutoff frequencies.

What is percent bandwidth?

Percent bandwidth expresses the filter bandwidth as a percentage of the center frequency and is commonly used to compare filters operating at different frequency ranges.

What is insertion loss?

Insertion loss is the amount of signal power lost as RF energy passes through the filter. Lower insertion loss helps maintain signal strength and system sensitivity.

What is out-of-band rejection?

Out-of-band rejection refers to the filter’s ability to attenuate unwanted frequencies outside the passband. Higher rejection improves interference suppression and signal purity.

What is VSWR?

Voltage Standing Wave Ratio (VSWR) is a measurement of impedance matching quality. Lower VSWR values indicate reduced reflections and more efficient RF power transfer.

How does a bandpass filter improve receiver performance?

By rejecting unwanted signals before they reach sensitive receiver components, a bandpass filter helps reduce noise, prevent overload conditions, and improve overall receiver sensitivity.

Can bandpass filters suppress harmonics?

Yes. Bandpass filters are commonly used to suppress harmonic frequencies, spurious emissions, and unwanted signals generated by transmitters, mixers, amplifiers, and frequency converters.

What is the difference between narrowband and wideband filters?

Narrowband filters provide tighter frequency selectivity and higher rejection near the passband, while wideband filters allow a larger frequency range to pass and may offer lower insertion loss.

How is filter selectivity measured?

Filter selectivity is determined by how quickly the filter attenuates frequencies outside the passband. Higher selectivity provides better separation between desired and undesired signals.

What waveguide interfaces are available?

460 Series Bandpass Filters are available with standard WR-series waveguide interfaces matched to the operating frequency band.

Are these filters suitable for millimeter-wave applications?

Yes. The 460 Series is specifically designed for microwave and millimeter-wave systems operating through frequencies as high as 140 GHz.

Can Mi-Wave customize bandpass filters?

Yes. Custom configurations are available for:

• Center frequency
• Bandwidth
• Rejection levels
• Waveguide sizes
• Flange types
• Mechanical packaging
• Environmental requirements

How do I select the right bandpass filter?

When selecting a bandpass filter, engineers typically consider:

• Operating frequency
• Required bandwidth
• Insertion loss limits
• Rejection requirements
• Power handling needs
• Waveguide interface compatibility
• Environmental conditions

What industries use bandpass filters?

Bandpass filters are widely used in:

• Aerospace and defense
• Satellite communications
• Telecommunications
• Radar and sensing
• Test and measurement
• Research institutions
• Government laboratories
• Commercial wireless systems

Can the same filter be used for transmit and receive paths?

In many applications, yes. However, filter selection depends on frequency range, power levels, insertion loss requirements, and system architecture. Separate transmit and receive filters are often used when different passbands or performance requirements are needed.

Glossary of RF Bandpass Filter Terms